Aluminum-wood composite sunshine room is made of high-strength aluminum alloy profiles as the main body, the interior side is decorated with solid wood, aluminum alloy profiles in addition to the role of wood protection, more importantly, through the optimization of the combination of two materials, will increase the strength of the window structure to a simple physical and quantitative index of the strength of solid wood structure can not be achieved.
Wood: This structure of the sunlight house has its own individual facade and top structure, and the whole sunlight room is a perfect whole. Aluminum wood composite sunlight room has higher requirements for aluminum alloy profiles and wood profiles. All timber must be degreased, anti-corrosion and flame-retardant treatment, and is a special glued timber to ensure the stability of the wood, to avoid wood cracking, decay and other phenomena, more reliable structure. Because wood is extremely sensitive to heat conduction, wood is the best insulation material.
Aluminum profiles: Aluminum profiles in the composite structure have higher requirements for wall thickness and hollow structure, wall thickness should be adjusted according to the size of the sunshine room, the larger the sunshine room, the higher the requirements for the main beam and auxiliary beam profiles, because of the greater weight to bear. The thickness is usually between 2 and 3.0mm.
防漏： 由于阳光房要建造顶部，和封阳台相比，人们更关心阳光房是否会漏水的问题。我们蓝浩铝木复合阳光房在屋顶构造上特别注意雨水的导流，有一定的斜度和弧度，引导雨水排泄。并且在玻璃和型材之间的打胶密封方面拥有10年 经验的技术工程师现场指导，确保密封绝无渗漏。
Leak proof: Because the sun room to build the top, people are more concerned about whether the sun room will leak than the balcony. The roof structure of our Blue Hao Aluminum-Wood Composite Sunshine Room pays special attention to the diversion of rainwater. It has certain slope and radian to guide the drainage of rainwater. And in the glass and profiles between the glue sealing with 10 years of professional experience of technical engineers on-site guidance to ensure that no leakage seal.
Glass: the glass at the top of the sunlight house is also an element of concern. We know that ordinary toughened glass will break down into glass particles and fall down, will not form a sharp corner of the glass sheet, will not happen to stick to people's problems. But if it's the top glass, the most safe thing is that nothing can fall off. Therefore, our excellent aluminum-wood composite sunlight room in Europe and the United States generally uses double-ply laminated glass, with seismic, anti-theft, bullet-proof, explosion-proof performance. The characteristic of this kind of glass is that in case it is hit by a high-altitude hard object, the glass will not break, will only see some cracks, will not fall down. The safety factor is fully considered.
Sunscreen: The top of the aluminum-wood composite sunroom is transparent glass. In the cold winter, the warm sunlight comes through the glass. The sunlight room is a comfortable warm room. But in the hot summer season, when the sun is shining, the sunlight room will be too hot to stay. How to solve this problem? Our fine aluminum and wood doors and windows factories in Europe and the United States are specially equipped with sunshade roofs, electric switches, can be opened or closed at will.
The above content is provided by the fire hydrant guardrail, want to know more, you can pay attention to our website: /, in the website has more professional knowledge introduction, hope to help you!